KentOnline

bannermobile

News

Sport

Business

What's On

Advertise

Contact

Other KM sites

CORONAVIRUS WATCH KMTV LIVE SIGN UP TO OUR NEWSLETTERS LISTEN TO OUR PODCASTS LISTEN TO KMFM
SUBSCRIBE AND SAVE
News

Gravesend firm Rollmark Engineering fined after safety failings

By: KentOnline reporter multimediadesk@thekmgroup.co.uk

Published: 13:30, 10 April 2013

Health and Safety Executive logo

An engineering firm has been fined for safety failings after a worker suffered life-threatening injuries during a flawed lifting operation in East London.

The 25-year-old from Gravesend, who does not wish to be named, punctured both lungs, broke 17 ribs and suffered major internal trauma as a result of the incident at a hotel under construction on Park Lane, Stratford, on November 15, 2011.

He was in intensive care for eight days and was off work for more than five months as a result of the injuries he sustained.

Westminster Magistrates’ Court heard today in a prosecution brought by the Health and Safety Executive (HSE) that his employer, Rollmark Engineering Limited, trading as MRI London, was contracted to move large items of equipment into a lower ground plant room at the hotel.

mpu1

Rollmark Engineering, of Wharf Road, Denton Industrial Estate, Gravesend, was fined £12,000 and ordered to pay £14,860 in costs after pleading guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974.

The injured worker was one of five MRI employees attempting to move a vessel weighing 1.3 tonnes into the room using a chain blocks and hoists.

"this serious incident was entirely preventable and clearly demonstrates the need to ensure that lifting operations are planned and managed with the utmost care" – hse inspector eileen gascoigne

One worker was operating the hoists, two others were standing alongside the vessel to steady it and the final two, including the injured party, were standing on the edge of a raised ledge to provide further steadying support.

The vessel had been manoeuvred so that two of its feet were on the floor, but as it was being raised to stand fully upright the injured worker fell from the upper level.

At the same time the vessel detached from a load hook and fell on top of him, pinning and crushing him against the edge of the ledge.

A subsequent HSE investigation found that although MRI had prepared a risk assessment and method statement for the work it was deficient in several areas.

The statement was lacking detail, the HSE said, the wrong lifting equipment was specified and the assessment was not site specific, failing to acknowledge the actual risks associated with moving equipment down into the plant room.

mpu2

HSE also found that the lifting equipment being used included a defective chain block hoist that had a missing safety catch.

After the hearing, HSE Inspector Eileen Gascoigne said: "This serious incident was entirely preventable and clearly demonstrates the need to ensure that lifting operations are planned and managed with the utmost care, especially when they involve heavy items of kit or machinery.

"Had the work been better assessed, and had the right equipment been provided, then the trauma the worker endured could have been avoided.

"He and his colleagues were placed at unnecessary risk, and I hope today’s prosecution sends a clear message to anyone undertaking such operations."

More by this author

sticky

© KM Group - 2024